Customer: VAR Veluwse Afval Recycling BV

Wilp – Achterhoek

Crushing Processing Plant Desription

The processing plant comprises a crushing section with scalping screen and two screening  and sifting sections to classify and separate foreign “light material”. These processing steps beneficiate a high quality recycling product.

The raw material is fed to the scalping screen by a specially designed apron feeder. Case by case, the pre screened fraction 0/10 mm can be conveyed to stockpile or returned to the crushed product. The oversize from the scalping screen is fed to the new generation Impact Crusher type AP-PH 1315/Q. This crusher is a special design, characterised in particular by the hydraulically supported impact aprons, the rotor with its high moment of inertia and the easy blow bar changing system.

The crusher discharge 0/40(x) mm is transported by vibrating feeder to a belt conveyor, at the end of which is an over belt magnet to separate the ferrous material. The two screening-sifting units are arranged in series to clean the fractions >40 mm and 16/40 mm respectively from the light fraction such as paper, EXP, wood etc. Then, the clean material can be conveyed either to the stockpile or back to the crusher. The operation of the plant is very flexible which gives the opportunity to produce for any requirement the following products:

Products  0 - 16 mm, 16 - 40 mm, >40 mm

alternative: 0 - 16 mm, 16 - 40 mm, >40 mm in closed circuit

alternative: 0 - 16 mm, >16 mm in closed circuit

alternative: 0 - 40 mm, >40 mm

alternative: 0 - 40 mm, >40 mm in closed circuit

clean granulation 16 – 40 mm  and > 40 mm

Technical Data  Crusher Section

Feed material: demolition waste, reinforced concrete, broken road paving

Maximum size: 0 – 800 x 800 x 600 mm edge length

or slabs 2.000 x 1.000 x 500 mm edge length

Capacity: up to 350 t/h, depending on feed material

Pre screening: eccentric shaft screen; classifying 40 and 10 mm

Impact Crusher: AP-PH 1315 Q

Inlet: height:  1.100 mm, width: 1.520 mm

Installed power (crusher): 200 kW

Crusher product:  0 – 40 mm mit ca. 4 – 8% oversize

Technische Data Screening-Sifting Section 1

Feed size: 0 – 40 (x) mm

Capacity: up to 350 t/h, depending on feed material

Screen: vibrating screen 1.400 mm x 5000 mm

Sifter: drum Ø: 1.000 mm x width = 1.600 mm

Granulations: 0 – 40 mm, 40 – x mm, clean

Technische Daten Screening-Sifting Section 2

Feed size: 0 – 40 mm

Capacity: up to 320 t/h, depending on feed material

Screen: vibrating screen 2.200 mm x 6000 mm

Sifter: drum Ø: 1.000 mm x width = 2.400 mm

Granulations: 0 – 16 mm, 16 – 40 mm, clean