The motion of the cone crusher number: cone crusher oscillation frequency is one of the key factors that affect crusher production capacity. Due to the meshing Angle of crushing cavity.problems in the design and parallel mining limit, is broken ore mainly rely on gravity and vibration along the conical slope. When the spindle rotation frequency increase, the ore easily expelled, but the rotation frequency is too high, is not conducive to mine, sometimes resulting in speed to production. General rotation frequency control in the range of 6 ~ 10 r/min. Therefore, the broken wall of the oscillation frequency on the improvement of production capacity has a certain role.

Parallel broken mining area: the length of the parallel broken mine is the guarantee of the cone crusher granularity uniform area. Parallel zone length increase, is advantageous to the granularity control, but mine discharge ability is less; Parallel zone length decreases, and conducive to mine, but the broken ore granularity is not easy to guarantee.

Meshing Angle: the size of the cone crusher rolling mortar wall and meshing Angle of the Angle between the crushing wall is called a. Meshing Angle generally take 22 ~ 23 °, the maximum is 27 °. If the meshing Angle is too large, ore easy to slip inside the crushing cavity, reduce production capacity, at the same time increase the liner wear and electrical energy consumption; If the meshing Angle is too small, will result in the crushing cavity is too small, accommodate the ore quantity is less, affect production, increase equipment manufacturing cost at the same time and the height of the machine.