Ore crushing process, the operation of the track jaw broken machine determines the quality and efficiency of crushing ore.
Specific jaw broken machine operating track how, consider the following analysis:
1. From the broken material, the requirements jaw broken machine jaw moving track of the operation is: moving jaw horizontal stroke is large enough, and make it from the discharge port to the feed opening is gradually increased.
2. From the liner wear reduction in terms of moving jaw vertical stroke is small enough, and make it facilitates nesting.
These two tracks operating under the control of the situation better, not only can effectively enhance the productivity jaw broken machine, but also can reduce to a large extent within the device liner wear.
Adapt to social development developed a compound pendulum jaw broken machine running its basic characteristics meet the above requirements, the movable jaw large horizontal stroke, simultaneously opening the discharge from the mouth to feed is gradually increased, and therefore more favorable ore crushing. The direction of movement of the movable jaw running track is also more conducive to nesting, so it has higher productivity, but its shortcomings that have a larger vertical stroke, to a certain extent, liner wear more quickly, so the device application period will be short.
Thus, the operating characteristics of the movable jaw to the evaluation of a jaw broken machine is good or bad has a decisive role, if its motion characteristics is poor, then the performance of this device will be poor, not for the basic ore crushing. Here Shanghai crusher manufacturers climbers Heavy Industries to introduce you to a relatively simple test method for moving jaw running characteristics, namely a piece of paper in Cartesian coordinates calibration, and affixed to the jaw Crusher feed opening the inside of the chassis wall, and then press the pencil in hand when the movable jaw to the feed opening level at the height of the tip at the top of the paper, and slowly make the pulley rotation, go a week on the white paper will show a real move jaw running track. Finally, with a ruler measure out actual values, and jaw broken machine into the operating performance of the trajectory is judged. Similarly, the discharge opening test this method can also be applied.
