Cone crusher there are many factors that affect the productivity, through the analysis of these factors, we concluded that how to improve the productivity of cone crusher, basically has the following four points:
1. Strictly control the material properties
Control into the nature of the material mainly includes three aspects, it is a hard material are prohibited, and at the same time in production to prohibit the gouge into the crushing chamber. Second is to control the grain size composition of the material, banned materials into the granularity is too high, but for fine powder content more material should be performed early screening. Three is to control the moisture content of materials, the material of water more than the sun, drying and other processing, so as to avoid material adhesion on the inner wall of the crushing cavity.
2. Improve the crushing cavity type
Crushing cavity structure of productivity, low power consumption, the uniformity of liner wear, particle size and other indicators, the important factors of cone crusher was improved, crushing cavity design on the proposed increase crushing cavity cavity volume, shorten the length of parallel zone and reduce cavity Angle, make the material in the crushing cavity is easy to form a thick layer of material laminate crushing, improve the effect of the material of broken, and can increase the number of broken ore in broken cavity, achieve the goal of improve equipment productivity.
3. The reasonable working parameters
The working parameters of cone crusher has direct influence on material movement characteristics, which have important influence on the productivity of equipment, so should ensure that equipment in the production of working parameters is reasonable. In order to improve the productivity of equipment, are generally of cone crusher crushing cavity design is improved, and according to the crushing cavity type has been improved, with the best working parameters, such as parallel zone length, move the bottom of the cone Angle cone, cone, oscillation frequency and dynamic cone trip, etc., so that the cavity shape with other parts, matching equipment to maximize the productivity of equipment.
4. Increase equipment crushing force.
Spring the firmness of affecting the equipment the size of the crushing force, when the spring pressure is insufficient, equipment will reduce the crushing force, so in production to ensure that the spring firmness of moderate. , on the other hand, can be sure by increasing the diameter of the cylinder and improve oil pressure of hydraulic station, to increase the cone crusher crushing force.
Above is the several simple method to improve the productivity of the cone crusher, if you are interested in our products, welcome to consult customer service, or leave a message to tell us you have what specific requirements and questions about product, we will contact you as soon as possible.