First introduce what is Impact crusher:
Combined on the basis of the machine is back at home and abroad to break now advanced crushing technology, production of a new type of crusher. This machine has the advantages of counter with hammer breaking. This machine is mainly used for medium and small broken cement raw meal, clinker, used in building sand, iron ore, sandstone, gypsum, coal gangue, coal, and other hard ore crushing. Big crushing ratio, little energy consumption, stable running, simple structure, convenient operation and maintenance, etc. This machine truly achieve the multi-purpose, high efficiency, low cost function.
The purpose of this Impact crusher and product structure features:
1. The machine can effectively deal with large moisture content of materials, prevent crusher blocking phenomenon.
When the moisture content of material is too large, vertical retaliate feeding chute and board can be equipped with heating device, to prevent the adhesive of the material. Vertical back broken not equipped with the bottom sieve plate which can effectively prevent blocking phenomenon. And hammer broken cannot use the heating mode to prevent cement materials, and shall be equipped with bottom sieve plate, increasing the likelihood of congestion.
2. The Impact crusher is suitable for soft material and is suitable for the materials hardness is very big.
The board hammer of the machine adopts mechanical clamping structure is due to the rotor, when with the rotor rotation with a lot of moment of inertia. Relative to the hammer crusher (hammer head went into a state of suspension), the machine rotor has more momentum, and adapt to the broken more hard material, the machine power consumption is low.
3. The machine can adjust the discharging granularity convenient and flexible, the adjusting range is extensive.
The machine there are several ways to adjust the size of handle, flexible methods, adjust the hammer plate and grinding chamber clearance, etc. Furthermore is to adjust the speed of the rotor.
4. Because of the machine structure design is unique, so the wear and tear of the machine parts, is smaller than hammer crusher, high material utilization.
The wear and tear of the machine plate hammer only on one side of the material in greeting. When the machine run normally, hit by the hammer plate material crushing, and the back of the plate hammer and side it is not wear. The machine utilization rate of metal plate hammer can be as high as 45%, 48%, is the general crusher.
5. This machine is simple, maintenance costs less spare parts replacement.
The machine is equipped with six plate hammer, easy to change, greatly save the maintenance time, improve the production efficiency. Welcome advice website customer service, to understand the impact breaker made in our company and other products.