Jaw crusher are main structure frame, eccentric shaft, pulley, flywheel, moving jaw, side guard plate, bracket, bracket in the back seat, adjustable gap screw, reset spring, fixed and mobile jaw jaw plate, etc, the bracket also have insurance effect.So what details need to be attention during operation, we detailed introduction for you today:
1. The jaw crusher must be started racing.After start-up if crusher abnormal tapping, should stop, identify and eliminate evils, reboot the machine.Starts after a certain time, functioning in order to start the feed equipment.Into the crusher ore should be increased gradually, until the full load operation, to avoid overload.
2. In the process of running, often should pay attention to all lubricating points lubrication is normal.Pay attention to the temperature of the bearing, especially the temperature of the eccentric bearing does not allow more than 600 c.Regularly check the abrasion of row ore mouth, according to the wear condition to adjust row ore mouth size.
3. During operation, but also often pay attention to the big ore blocks stuck crusher feed mouth, if you have stuck, want to use the hook to flip ore, make it out.If ore block crushing cavity, should stop to mine, to be finished ore crushing cavity open another feeder;If need large ore from the crushing cavity must be treated with specialized tools after downtime, forbidden by hand from the extracted ore crushing cavity, so as to avoid an accident.
4. Uniform must pay attention to in the operation of the ore, ore to packed with crushing cavity.Feed at the same time keep a excavator relieving and drill the crushing into the jaw crusher.Once found the broken objects into the crushing cavity, and through the row ore mouth of the machine, shall immediately notify the belt transport post out in a timely manner, in order to avoid to the next section of the crusher, cause serious equipment accident.