The correct use of sand making machine can not only improve the service life of the equipment, also can reduce in the production of small problems, improve the production efficiency, to create the biggest economic benefits for the user.
1, check before starting the vortex chamber door is shut, to prevent the material from the vortex chamber to observe rushed out of the door, produce risk.
2, check the impeller rotation direction, from the mouth direction. Impeller should be counterclockwise rotation, otherwise the motor wiring should be adjusted.
3, crusher and conveying equipment of the startup sequence is: discharge to crusher, feeding crusher must be started light, can give the material after crusher operating normally. In contrast to the boot order stop order.
4, filling particles in strict accordance with the specified requirements, is greater than the specified material into the crusher is forbidden, otherwise, will cause the impeller imbalance and excessive wear of impeller base to jam impeller passage and center into the feed tube, make the crusher can not work normally, found a large piece of material should be ruled out in time.
5, stop discharging device, should stop feeding in time, otherwise, will cause the crushing impeller, burning motor.
6, to strive for continuous uniform.
7, breaker operation process, can not have violent vibration and abnormal noise, otherwise, should stop it for checking.
8, machine lubrication
Lubrication for dry oil lubrication, sand making machine each work, add right amount of grease, after working several class, open the main bearing of main bearing cleaning, replacement of bearing when necessary.