Stone production line, the first working procedure supplied by vibrating feeder for jaw crusher, and then immediately counterattack crusher, jaw crusher here that play the role of large stone after extrusion, by belt conveyor to the counterattack crusher and stone broken into 20 to 60 cm, on the use of high-speed rotation of the rotor plate hammer, the materials into the crushing chamber to produce high speed impact and breakage, and so has broken material along the tangent direction at high speed into the crushing chamber at the other end of the back plate, is broken again, and then rebounded from the back plate to plate hammer, continue to repeat the process. Because of the high-speed throw stones, could drop stones and the stones collision occurs later. This is the stone hit stone Liming heavy industry development counterattack crusher principle. So can better use the material, and reduce the wastage of the wearing parts, for the customer’s real lower production costs.
Whether in the system of sand production line, stone production line, our purpose is to ensure that counterattack crusher, jaw crusher will continue normal operation, in order to prolong the service life of broken machinery and equipment, we must in the process of using the counterattack crusher for periodic maintenance and maintenance, it is necessary for the process. Our factory for all kinds of crusher equipments have done a long time before they go out of idle, to reduce failure occurs in the process of use in the future, our customers in the operation of the new machine production, per shift production run after to counterattack crusher and so on to conduct a comprehensive inspection, each parts tightening, belt drive is normal, liner wear, have a comprehensive understanding of a cyclical, the timing of inspection.
When purchasing a counterattack crusher, at the same time, under the guidance of our engineers to understand what is wearing parts, because in the process of crushing large materials will wear plate, back plate, must follow the principle in the process of change, on the first shelf, shelves and in the case of the connecting bolt after will unload, and then using a wrench screw to flip device hex head part, and then slowly open hit the shelves. At the same time, can use frame at the top of the back frame hanging device. Repeat the above process, namely, closed after the shelves. Counterattack hammer broken plate wear should be timely adjust or change, to a certain extent to avoid fasteners and other components, and cause greater losses.
Counterattack crusher plays an important role in the broken stone production line, before the problem did not appear, must be detailed inspection, not trusting the effect, in order to avoid penny wise and pound foolish, cannot work normally running.