English | Español | Русский |
Home Page About Us Products News Gallery Service Contact Inquiry Blog
">

Desulfurization Equipment of Liming Heavy Industry is No.1

Last Update Time: 6/22/2011 1:44:34 AM

    The electric power pollution has been paid more attention to by our government in recent years. SEPA (state environmental protection administration) & SETC (state economic & trade commission) promulgate the emission standard of air pollutants for thermal power plants, the power plant flue gas desulfurization’s key technology and equipment planning points, etc. Also, they put the policy regulation and economic levers into use to urge the fire &power enterprise protecting the environment, with the purpose of environmental development of electric power enterprise, with a additional aim of integration and localization of power plant’s desulfurization & dedusting.

    According to the date of CRAES, the fire & power enterprise’s gas emission takes a big amount of air pollution in China. The sulfur dioxide’s emission is 21,500,000 ton with 11,000,000 ton of fire & power enterprise, which covers more than 50% of the total emission of sulfur dioxide. With the same control level of ejecting, the sulfur dioxide will reach 21,000,000 ton which is only ejected by fire & power enterprise in 2020. Except for the sulfur dioxide pollution, there is still some pollution water. Every province carried out all kinds of preferential policy for desulfurization, which boost the enterprise’s installation of environment protection equipment, especially the electrical power for desulfurization equipment with a peak in the next 2 or 3 years. From a long sight, the emission of sulfur dioxide needs reduce by 50% with the control of 12,000,000 ton per year, in which the electric and power under 5,500,000 ton per year.

    Aiming at the grinding system of the desulfurization in the electric and power enterprise, Liming Heavy Industry specially produce the grinding mill series machine, which is suitable for all kinds of large thermal power plant and steel mill’s desulfurization. The desulfurization mill gets through the CE certificate, which can go directly into EU market. This series mill has the characteristic of high output, low consumption, environmental, high whole set, easy safeguard, etc. What’s more, according to the different calcium consumption of limestone and the design craft, the requirement of fineness of the finish product is different, too. But our Liming mill equipment can adjust the finish product’s fineness from 300mm to 400mm at once, with the customers’ praise. Also with the CAD optimized layout design, the architect saves a lot of time so the mill becomes the first line in China. T190 industrial desulfurization mill becomes the biggest mill in China and acquires widely applause.

[PRINT]    [CLOSE]

Home Page | About Us | Products | Contact Us | Jaw Crusher | Cone Crusher | Impact Crusher | VSI Crusher | Mobile Crusher | Crushing Plant
© Copyright 2000-2015, Liming Heavy Industry (Shanghai).
Tel:0086-21-33901608 E-mail:shcrusherfs@gmail.com