Brief Introduction:
VSI5X Vertical Shaft Impact Crusher is integrated with three kinds of crushing modes and becomes core equipment in sand making industry. Through special optimal design, throughout capacity of material is improved by about 30% for deep-cavity shape rotor for VSI5X sand making machine. Innovation design is adopted for guard board, improving service life by more than 48%. Addition of secondary hammer can effectively avoid damaging riser after main ram is worn. The most crucial wear resistant materials adopts highly anti-wear and heat-resisting material used in important industries in America. Hydraulic hood opening device adopting originally imported parts can facilitate checking and maintaining equipments. VSI5X Vertical Shaft Impact Crusher is widely used in every kind of metallic and nonmetallic minerals, cement, refractory materials, grinding, raw material of glass, building aggregate, machine-made sand and metallurgy etc. It is applicable to intermediate-fine operation for each kind of minerals and rocks with different intermediate-fine hardness such as iron ore, nonferrous metallic ores, carbon silicide, bauxite, quartz sand, brown aluminum oxide, perlite, basalt and other high-hardness material.
Performance Features:
1.After deep-cavity shape rotor is optimally designed, throughout capacity of material is improved by about 30%.
2.After guard board is partially worn, its direction can be changed upward and downward, to improve usage rate of material; service life can be improved by more than 48%.
3.Combinatory ram design: only need to replace the part of worn ram, which can lower using cost by more than 30%. Furthermore, addition of secondary ram can effectively avoid damaging riser after main ram is worn.
4.The most crucial wear resistant materials adopts highly anti-wear and heat-resisting material used in important industries in America.
5.Adoption of rhomboid impact block can avoid damaging riser after material is impacted and worn.
6.Bearing is selected from international brands from Japan, Sweden and America etc.
7.Optimal ejecting port and internal smoother curved form design can lower flow resistance of material and greatly improve throughput capacity of material.
8.Dual purpose bulk panel ensures simple operation and convenient conversion between two kinds of feeding modes.
9.Special sealing structure at lower end of spindle guarantees no leakage without oil sealing.
10.Hydraulic hood opening device adopting originally imported parts from Japan makes movement of upper cover convenient and rapid, which saves strength when replacing and maintaining parts inside the main body.
11. Selection of high degrees of protection motor. Such type of motor has the features of high efficiency and low noise, in accordance with standard of International Electrotechnical Commission (IEC), F grade insulation and IP54/55 degree of protection.
Technical parameters:
1. Main technical parameters:
model | VSI5X7615 | VSI5X8522 | VSI5X9532 | VSI5X1145 | ||
Throughput capacity (t/h) | Center and Ring feeding | 150~280 | 240~380 | 350~540 | 500~640 | |
Center feeding | 70~140 | 120~200 | 180~280 | 250~360 | ||
Max. Feed Size (mm) | Soft material | <35 | <40 | <45 | <50 | |
Hard material | <30 | <35 | <40 | <45 | ||
Rotation speed (r/min) | 1700~1900 | 1500~1700 | 1300~1510 | 1100~1310 | ||
Power of double motor (KW) | 110~150 | 180~220 | 260~320 | 400~440 | ||
Overall dimension L x W x H (mm) | 4100×2330×2300 | 4140×2500×2700 | 4560×2600×2900 | 5000×2790×3320 | ||
Weight (t) | 8.6 | 11.8 | 17.5 | 27.5 | ||
Power source |
380v,50Hz | |||||
Thin oil lubrication station | Power for double oil pump | 2 x 0.31 KW | ||||
Safety | To make sure the supply of oil with double oil pump, working without oil, temperature when water cools, start the motor by heating it in winter. | |||||
Power for oil box heater | 2 KW | |||||
Overall dimension
L x W x H (mm) |
820 x 520 x 1270 |
Note: Capacity depends on crushing limestone, material size, moisture and features also affect capacity.
2. Lubricating system parameter:
Oil box volume (L) | 240 |
Rated pressure (MPa) | 0.63 |
Flow capacity (L/min) | 8 |
Power (KW) | 0.31 |
Cooling water consumption (m3/h) | ≥1.2 |
Electrical heating voltage (V) | 220 |
Medium | Bearing oil 32—46# |
Notice: Any change of VSI5X series of Vertical Shaft Impact Crusher technical data shall not be advised additionally.