CS Series Cone Crusher

Cone crusher for CS series is a modern high-performance cs cone crusher or cs crusher,which is developed based on laminated smashing principle and conceptual design of “more crushing and less grinding” according to users' demands. The cone crusher is integrated with high wobble frequency, optimal cavity shape and reasonable stroke. CS cone crusher has more reasonable and perfect structure and more advanced technology. It is excellent in manufacturing, installing, applying and maintaining etc and can be widely applied in metal and nonmetallic minerals, cement works, building, sandstone metallurgy etc. It is applicable to iron ore, nonferrous metallic ores, granite, limestone, quartzite, sandstone and pebble stone etc. Same as PY series of spring cone crusher, the standard type of CS cone crusher is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.Thus can be used as secondary crusher or tertiary crusher.

Structure composition of CS Cone Crusher:

CS cone crusher mainly consists of frame, fixed-cone assembly, dynamic cone assembly, spring mechanism, bowl type shaft bracket part and drive part etc. its supplementary parts consist of electrical system, thin oil lubrication system and hydraulic cavity-cleaning system.

Structure features of CS Cone Crusher:

(1) Hydraulic system. The machine is equipped with hydraulic system to adjust the size of discharge opening for crusher. The hydraulic system effectively guarantees safe operation of equipments. When foreign matters exist in the crushing cavity, the hydraulic system can make dynamic cone body automatically retreat downward. When foreign matters are discharged, the system makes the retreated dynamic cone body automatically reset to keep the original position of the discharge opening to continue work.
(2) Shapes of crushing cavity. The shape of crushing cavity refers to geometric space formed between the dynamic cone and the fixed cone. The shape of crushing cavity has a strong influence on the performance of the whole machine. The shape of crushing cavity is the main technical index for crushing. Totally four specifications of cavity shapes are designed from coarse crushing to fine crushing of the machine. It may have six kinds of combination, meaning that it can be best applicable to special requirement of users.
(3) Reliable sealing: the labyrinth type seal device is adopted to substitute the old water type sealing mode to prevent dust and foreign matters from entering the machine, to guarantee lubricant clean and prolong the service life of the slide bearing and the thrust ball bearing and thereby to make the machines run reliably.
(4) Convenient replacement: it used to be very slow to replace crushing wall of former crushers. But with new structure it is very fast to replace the crushing wall of the cone crusher. As gripping part is installed on upper crushing wall, the crushing wall can be fixed just through using bolt for jacking. Lower crushing wall is fixed through using hydraulic nut for tightening. There is no need to supplement any filling materials on the back surface of upper and lower crushing walls. So it can be conveniently and rapidly replaced, thereby decreases labor strength.
(5) Adjusting opening: high-pressure-resistant displacement sensor is adopted for the machine. The position of discharge opening is adjusted in the operation room. Once press a button, corresponding information will be showed on the operating platform and we will find the size of discharge opening to be adjusted, which is very convenient and accurate.

Main Technical Data:

Standard

Short Head

Note: the capacity is based on limestone.